Maintenance of new industrial sewing machine

Maintenance of new industrial sewing machines before use is the most easily neglected, but it is an important part of maintenance. There are three aspects to be paid attention to in this link.

1. Before using the sewing machine, it is necessary to clean up the dirt accumulated in the transport of the machine.

2. Verify that the set voltage is correct and the power plug is plugged incorrectly. Do not start the machine if the power specifications do not match.

3. Verify that the sewing machine is running in the correct direction, standing on the side of the handwheel, and the counterclockwise operation is in the correct direction, and do not run in the opposite direction.

Ensure that all 3 points above are met before the new machine can be officially started. In the process of running an industrial sewing machine, keep in mind the "3 do not".

1. Do not run a sewing machine without removing safety devices such as protective covers, finger protectors, etc., and without enough oil in the pan.

2. Do not close fingers, hair, clothing, or other objects to rotating parts such as handwheels, shuttles, or the inside of the pole housing.

3. Do not forget to turn off the power supply when putting the sewing machine upside down or when loading and unloading the machine needles.

After the industrial sewing machine is finished, daily maintenance is the key to prolonging its life, keeping the machine running smoothly, and preventing accidents.