Top ten reasons for embroidery machine moving

When the user operates the computerized embroidery machine, he sometimes encounters the displacement of the embroidery sewing machine. What should he do in this case? In fact, as long as the reason for the move is found, it will be easy to solve. Generally speaking, there are 10 main reasons for the position of embroidery:

01. In typesetting, the underlined line is too close to the edge of the object

02 The line used for undercutting is too thin or angled and does not hold the cloth well.

03. Typing should be done as far as possible from the center to the periphery so as to be more stable in the production process.

04. During the production process, due to the reuse of double-sided adhesive paper, the adhesion is reduced and the cloth cannot be fixed.

05 Owing to the aging of the embroidery machine and the decrease in precision, displacement is caused, for example, the same batch of embroidery, some are normal and some are displaced.

06. Due to the fluff on the surface of the cloth, it is obvious when affixing cloth to the cloth.

07. The paper lining under the cloth is too thin to line the cloth well.

08. Pull (cloth) paper on the embroidery machine just right, not too hard, otherwise, it will change easily

09. Typing should consider the overall rationality of needle walking: if you do not go to a single needle in one place, then run straight to embroider a large flower far away from the single needle and return to wrap the single needle with a wrapping needle, then the position is very common, it is not visible in the software, and it will change on the embroidery machine.

010. Increasing the number of thread changes will reduce productivity, but the likelihood of shifting will be much less. How do you combine the two?