Ultrasonic nonwoven mask ear loop welding machine factories

Common problems with Ultrasonic nonwoven mask ear loop welding machines need to be noted:

1. Mold and transdicator each equipped with a cooling fan, so that the cooling efficiency is a little better.

2. Mold and fusion wheel to be adjusted to the level, uneven welding will be unstable.

3. Flanges and steel molds need to be tightened, otherwise there will be noise;

4. Do not blindly standard rate, want to speed up, long-term high-speed operation of nonwoven mask ear loop welding machine consumption is very large.

5. Choose the right equipment, flat machine with 15kHz2600W is usually better;

6. Sound recognition, normal application will be accompanied by sharp squeaks. never deranged function by subjective feeling!

7. Accuracy of steel mold welding surface and plane standards are very high, to prevent collision damage, otherwise it will cause welding instability, the steel mold will basically be scrapped.

8. Pay attention to the power cut to let the ultrasound rest. Long-term high-speed operation of continuous electricity, nonwoven mask ear loop welding machine scrap will become faster.

9. If the control line is long, a relay can be installed to control the power supply with a computer; intermittent leads come out of the chassis.

If you are looking for Ultrasonic nonwoven mask ear loop welding machine factories, please contact: wym@eagleco.cn