Categories
Contact Us
Add: No.31 Zhangba Er Road, Xian, Shaanxi, China
Tel: +86-29-68723798
Mob: +8613991913180
E-mail: [email protected]
Knowledge
Home > Knowledge > Content
What are the characteristics of the various systems of the face mask machine?
Sep 15, 2020

The performance of the face mask machine is stable, the production speed can be continuously adjusted, the production efficiency is high, up to 160 pieces per minute, it is convenient and accurate to count, the utilization rate of raw materials is also high, the operation and adjustment are simple and convenient, the degree of automation is high, and the labor cost is effectively reduced. Let's take a look at the characteristics of the various systems of the mask machine:

A. Folding molding system.

1.Chip folding device, easy and fast adjustment.

2.Large diameter fuse wheel, effectively reduce product deformation.

B. Fully automatic feeding system.

1.Aluminum frame, strong and beautiful, to ensure that the size of the finished product is accurate;

2.Stainless steel fixture, which can be adjusted left and right;

3.The tension wheel is set to adjust the tension of the fabric width to effectively ensure the beauty and flatness of the finished product;

4.Independent nasal conveyor group for easy adjustment and maintenance.

various systems of the face mask machine

C. Ultrasonic thermal system.

1.Titanium alloy molds. When most face mask machinery manufacturers use aluminum alloys, face mask machines have been provided and actively encourage customers to use titanium alloy molds, because aluminum alloys are easy to oxidize and burst, and are not suitable for long-term rush operations. , Short service life and other shortcomings.

2.Imported ultrasonic transducer, 20K international frequency standard, the output is more powerful and stable; plus two sets of ultrasonic systems, effectively guarantee the welding quality of the product.

3.The PLC program controls the actions of the whole machine to reduce the difficulty of operation for the users.

D. Discharge system.

Two pieces of products are formed at one time to increase the production speed; the product discharge position is automatically stacked, which is convenient for the finishing and stacking of the finished products, and saves time and effort for the next process of ear strap welding.


If you want to know us, please contact: [email protected]





  • Newsletter
  • Categories
  • Contact Us
    Add: No.31 Zhangba Er Road, Xian, Shaanxi, China
    Tel: +86-29-68723798
    Mob: +8613991913180
    E-mail: [email protected]
  • QR Code
  • Copyright © 2016-2020 Topeagle International Ltd All rights reserved.