What do I have to pay attention to when using a sewing machine? That is "cleaning up". If daily maintenance can be done, dust and thread ends can be prevented from accumulating, malfunctions will not occur, the machine can be used in a good condition. Also, while cleaning the machine, some abnormalities can also be found. Repairs to machine malfunctions are mostly caused by accumulation of dust or thread ends.
Not only the sewing machine can be cleanly cleaned, but also abnormal conditions must be found. For cleaning, maintenance is essential.
Of course, it is not necessary to make the surface of the needle bar and the upper looper shaft without any oil at all. as long as the dust is removed, light wiping is sufficient. for places with complex shapes, you can use a toothbrush to clean it, which can easily remove dust. in addition, some sharp parts on the sewing machine should be very careful not to get injured during the cleaning process.
The key parts of cleaning:
For the sewing machine, not only do not make it malfunction, but also to ensure the quality of sewing, there are 5 most important points. If you can clean these areas thoroughly and cleanly, you can sew beautiful stitches. These areas should be cleaned in order, it is recommended to clean them once a week.
① Around the needle (wipe the needle bar)
② Around the hook (cleaning around the hook)/ Around the looper (cleaning around the looper)
③ Around the thread trimming knife (cloth cutting knife) (cleaning of the thread trimming mechanism)
④In the oil pan (cleaning)
⑤Wipe and clean the whole (including the machine)
Different models, different shapes, the key parts of cleaning are the same.
If you want to know us, please contact: [email protected]