Categories
Contact Us
Add: No.31 Zhangba Er Road, Xian, Shaanxi, China
Tel: +86-29-68723798
Mob: +8613991913180
E-mail: [email protected]
Knowledge
Home > Knowledge > Content
Fully automatic face mask machine 1+2
Sep 27, 2021

Because of the COVID-19 and many changes in the environment, so that we now go out to have to wear a face mask, as the general public for masks is a lot of requirements, Therefore, a factory is required to ensure an adequate number of masks when producing them., generally we usually wear medical masks (disposable ) in the majority, so fully automatic face mask machine 1+2 is very common.

automatic face mask machine 1+2

Speaking of the work process of a 1+2 mask machine, including coil loading, folding pressure, nasal rib loading, molding, cutting, ear tape material and welding, finished material and other processes, and then complete the whole process from the roll material to the production of the finished product. Masks produced according to the entire production process are not oppressive to wear. But we pay attention to the production of the number of masks at the same time, but also to ensure the quality, protection needs to be online, do not ignore the protection of masks.

The main features:

1. Fully automatic face mask machine 1+2 is the use of ultrasonic welding technology, the entire production process is automated work process.

2. The frame of the mask machine is made of aluminum alloy, partly stainless steel, the entire production line is easy to clean.

3. Control the process by computer PLC programming.

4. Through photoelectric testing of raw materials, to avoid mistakes to reduce waste.

5. The machine's platform is relatively dense, the volume covers a small area.

Fully automatic face mask machine 1+2

The production process of Fully automatic face mask machine 1+2

The production process of the flat mask machine is mainly: the whole cloth is rolled first and then driven by the rollers,The cloth placed can be automatically folded and wrapped; Then the nose beams are pulled out and uncoiled in the whole roll, and then cut to length before being introduced into the cloth wrapping the edges. The two sides are welded to the closure by ultrasonic welding. Then, the nose beams can be sealed laterally by ultrasonic cutting and shaped by cutter. Then, the mask is transported to the ear belt fusion through the assembly line, and the shaping step is through ultrasonic welding.


If you are looking for Fully automatic face mask machine 1+2, please contact: [email protected]


  • Newsletter
  • Categories
  • Contact Us
    Add: No.31 Zhangba Er Road, Xian, Shaanxi, China
    Tel: +86-29-68723798
    Mob: +8613991913180
    E-mail: [email protected]
  • QR Code
  • Copyright © 2016-2020 Topeagle International Ltd All rights reserved.