In the face of the spread of the global epidemic, in order to alleviate the difficulty of obtaining one machine for protective clothing production equipment, our company promoted a Hot Air Seam Sealing Machine.
The production of medical protective clothing is generally to cut the SMS non-woven fabric after finishing three protections and one resistance (waterproof, anti-blood, anti-oil, anti-static, anti-bacterial) into cut pieces and splice, Then in accordance with the process requirements of the cutting, zipper according to the design size requirements stitched together, All stitched places, such as sleeves and waists, also need to be reprocessed. Reattach the sealed hot strip to the place where the stitches are stitched, From fabric production, cutting and sewing, pressing rubber strips, aseptic processing of garments to finishing finished products, there are at least more than 10 processes in between. The processing equipment involved are mainly flat seam machine, sewing machine and glue press machine, etc.
The lack of beading machines (also known as hot air seam sealing machines, sticking machines, and heat sealing machines) is the bottleneck for the production and expansion of medical protective clothing. The heat sealing tape is a relatively complicated process for manufacturing protective clothing. The hot melt adhesive tape is applied to the seam of the protective clothing by the hot air pressing machine and the fabric, which can effectively prevent viruses from being stitched from the needle. Penetrate at the interface. Sewing sealer, also known as hot air seam sealer, heat sealer, glue press, sealing machine, hot air sealing machine and so on. The heating tube is heated, and then the heat is blown onto the heat-sealing tape with the air pump to bring it to the melting point, and finally the two rubber wheels are closed and turned, so that the tape and fabric are tightly combined.
1. Hot Air Seam Sealing Machine is mainly used in various types of medical protective clothing, waterproof clothing, outdoor sports products sewing waterproof processing, such as suits of raincoats, waterproof shoes and hats, tents, storm clothing, waterproof wetsuits;
2. It can blow tape width standard type 14mm to 25mm, other width can be freely selected according to customer demand;
3. Pressure wheel width 25mm standard surface, other such as steel, straight, etc. can be freely selected;
4. Thermal control no segment adjustable, room temperature to 700 degrees C;
After the cap pieces are sutured with a flat car, they are sealed with a heat sealer.
Use a flat car to sew up the zipper, and use a flat car to sew the placket on the body (through the lower end of the zipper to the mouth of the cap), and use hot air pressure to seal it.
If you want to know us, please contact: [email protected]