Industrial embroidery machine from manufacturer: high speed

The efficiency of an Industrial embroidery machine is often described as being based on its maximum speed. In fact, when the machine switch a larger needle length, the electronic control system will adjust machine's speed.

As a professional manufacturer, our Industrial embroidery machine can reach 1200RPM . we can give an example, A machine runs at a maximum of 750 RPM at a 2mm switching needle length, when the switching its length to 10mm, the electronic control system reduces its speed to a relatively low (<500 rpm) level and adapts to the time when the stepper motor drives the embroidery frame action.

Therefore, it can scientifically describe efficiency of computer embroidery machine should have three parameters, the maximum speed, the lowest speed, the switching needle length. The maximum and minimum speed determine the speed range of the machine, while the long switching needle determines the reduced speed of the key needle length, because when the desired needle grows longer than the switching needle, automatically lower the speed to adapt to the embroidery frame action in place.

The full servo system is achieved by increasing the maximum speed, minimum speed and changing the length of the switching needle. Traditional way of using stepper motor which drives the embroidery frame of the computer embroidery machine, the maximum speed is generally set at 750 rpm, when the needle grew at 5mm, due to the performance limit, the electronic control system will automatically reduce the spindle speed, to ensure that the embroidery frame has enough time to operate in place. Servo motor, featured by high speed, strong overload capacity, large output torque and so on, is applied to the embroidery frame drive, greatly shorten the time period required for the embroidery frame back and forth movement, which allows the embroidery spindle to maintain high speed operation when using a larger switching needle length, thus improving the efficiency .

Due to the use of servo motors, switching needle length can increase its length to 7mm without slowing down, so that most needle lengths are operating at the highest speed.

Summarize the characteristics of the Computerized embroidery machine : 1. From the original stepper motor system improved to servo motor system.

2. Switching needle length , spindle rotation high speed increase, embroidery frame action cycle shortened.

3.Embroidery frame movement is more smooth, less noise.

If you are looking for industrial embroidery machine manufacturers, please contact: wym@eagleco.cn