It only takes 3 steps to clean the computer sewing machine

Any machine that has been used for a long time should be checked and maintained regularly so that it can be used more smoothly and extend its service time. Now let's take the computer sewing machine as an example to talk about cleaning and maintenance.

The computer sewing machine is different from the mechanical sewing machine. Its task is much larger, and its cleaning is particularly important. The precondition is to cut off the power supply and stop the machine, so as to ensure that no accident will occur during the cleaning process.

1. Cleaning of the feed dog

Remove the screw between the needle plate and the feed dog, remove the cloth wool and dust, and add a small amount of special oil for the sewing machine;

2. Cleaning of shuttle-race

The shuttle race is the core of the sewing machine, and also the place where faults are most likely to occur. Therefore, dirt should be removed frequently and a small amount of sewing oil should be added;

3. Cleaning of other parts

The surface of the sewing machine and all parts inside the panel should be cleaned.

After using the sewing machine, you'd better spend a few minutes cleaning the computer sewing machine. This will create a good working environment for future work and achieve the dual purpose of maintaining the machine!