Introduce to you the common faults and some precautions of Ultrasonic Lace Cutting Machine, so that we can better understand the equipment, after purchasing the machine, it can also help you to do some troubleshooting and maintenance of the machine. Telling you the precautions of the equipment in detail can prevent you from taking precautions and reduce a lot of unnecessary troubles, so let's start to introduce you.
Problems of Ultrasonic Lace Cutting Machine:
There are some common problems, such as uneven pressure; pressure relief; uncontrolled pressure; slow feeding speed; pressure drop during work, etc.
1.Uneven pressing problem: Uneven pressing during embossing is usually caused by improper debugging, such as uneven horizontal position of the embossing machine.
2.Pressure relief problem: The pressure relief problem of the Ultrasonic Lace Cutting Machine is usually more than 5 years. The problem comes from the cylinder and needs to be replaced.
3.Uncontrolled pressure problem: The oil seal of the pressure regulating valve is broken, the oil seal of the feed rod is broken and needs to be replaced;
4.Slow feeding speed: This problem is mainly caused by the feeding superimposing valve or loose after travel switch;
5.Pressure drop problem: The pressure drop of the embossing machine is mainly caused by problems such as the aluminum block under the main valve or the oil seal of the pressure regulating valve, as well as adjustment level.
If you want to know us, please contact: [email protected]